Shenzhen Bropool Industrial Co., Ltd. is a professional manufacturer on sauna room, hot tub and cold plunge
Tel：+86 18928448819 E-mail：info@bropool.com
Shenzhen Bropool Industrial Co., Ltd. is a professional manufacturer on sauna room, hot tub and cold plunge
Tel：+86 18928448819 E-mail：info@bropool.com
1、 Choose based on safety and convenience 1. Safety factors. One is the formaldehyde content, and the other is whether there is excessive radiation. After opening the sweat steaming room for a period of time (ten to twenty minutes), mount the tester. 2. The electrical system must adopt a double layer protection system. To ensure personal safety, double layer safety protection is adopted, including leakage protection and overheating protection. Is there a report from ETL (Electronic Testing Laboratory) in the United States if there are domestic electronic inspection institutes exporting for foreign trade. The typical power of a sweat steaming room is 1000 to 1500 watts. Under such a load, and at home. Naturally, consideration should be given to the quality of the wires to prevent fires. Below is a comparison of two types of wires. It must be the coarsest choice. 3. Is the control panel convenient to use and has a timing function. Make people not suffocate when sweating. It is be
Professional installation technology can also increase a certain safety factor, which will make us more at ease. The one-stop installation service of household sweat steaming rooms has indeed saved us consumers a lot of worry. Speaking of the earliest sweat steaming in ancient times, only the royal family could enjoy it exclusively. Do you have the guts, princes, and generals? Today, we can also enjoy the exclusive treatment enjoyed by the royal family at home. Life is a beautiful day, and we hope that tomorrow will be even better. We also hope that the use of household sweat steaming rooms can bring us more positive energy. Household sweat steaming rooms have now become a fashionable product, and more and more people are starting to use them. As long as you are responsible for waterproofing and ceramic tiles in your home, you can choose to install a sauna room, because sauna rooms still have high requirements for waterproofing measures, so it is necessary to establish a good wate
Firstly, we need to take a shower, then change into a sweat steam suit, and then go to the sweat steam. In terms of this, the sweat steam and shower room can be separated by a certain distance, without the need to put the sauna room in the shower like the sauna room. 1. First, place the bottom of the sweat steaming room flat on the ground, with one groove on each side of the bottom and two grooves at the back. 2. Place the back of the sweat steaming room on top of the bottom, and make sure that the two wooden strips are embedded in the grooves. At this point, one person is needed to support the back of the sweat steaming room and prevent it from collapsing. 3. Place one side of the sweat steaming room above the bottom, and also insert the wooden strip into the groove. At this point, the copper buttons at the bottom, back, and side can be fastened, and the sweat steaming room can basically stand on its own without the need for support. 4. At this point, the seat plate in the swe
The core component of the sweat steaming room, the germanium carbon based radiation energy plate, can release a large amount of far-infrared light with wavelengths ranging from 5.6 to 15 microns, which is the lifeline of human beings. When the infrared light comes into contact with molecules with electromagnetic properties (water molecules), the speed of the lightest hydrogen molecule is 1.8 kilometers per second, and the direct distance can travel 1.78 kilometers × 10-5cm, which collides with other molecules 10 billion times per second, will generate rotational motion (vibration), providing electromagnetic molecules (water molecules) with motion heat, accelerating the vibration of the already vibrating molecules and colliding with other molecules. This collision can generate heat. The average body temperature of a person is 36.5 ℃. According to the formula (273 ℃+36.5 ℃)/2897=9.36 microns, if the temperature is converted to wavelength, 9.36 microns is exactly between 5.6 and 15 m
The core component of the sweat steaming room, the germanium carbon based radiation energy plate, can release a large amount of far-infrared light with wavelengths ranging from 5.6 to 15 microns, which is the lifeline of human beings. When the infrared light comes into contact with molecules with electromagnetic properties (water molecules), the speed of the lightest hydrogen molecule is 1.8 kilometers per second, and the direct distance can travel 1.78 kilometers × 10-5cm, which collides with other molecules 10 billion times per second, will generate rotational motion (vibration), providing electromagnetic molecules (water molecules) with motion heat, accelerating the vibration of the already vibrating molecules and colliding with other molecules. This collision can generate heat. The average body temperature of a person is 36.5 ℃. According to the formula (273 ℃+36.5 ℃)/2897=9.36 microns, if the temperature is converted to wavelength, 9.36 microns is exactly between 5.6 and 15 m
The duration of sweat steaming should be adjusted based on the time and individual constitution. Sweat steaming is a process of sweating through cellular movement, eliminating metabolic products and repairing body cells. Since sweating is the foundation, we can generally extend the duration of sweat steaming in cold winter weather because even sweat steaming can cause less sweat than usual, and at this point, only surface sweat begins, At this point, we should control the time a bit longer, usually 80 minutes. In the spring and autumn seasons, the temperature is between 15-20 degrees Celsius, and a slight movement of the pores can eliminate sweat. At this time, we can adjust the time for sweat steaming to about 60 minutes; So the summer weather is quite hot, and you may be able to sweat outside. In fact, sweat evaporated from sweat is not the same concept as exercise sweat. High temperature sweat and exercise sweat are both metabolic products that eliminate the surface layer, while
1. Dry steam room The dry steam room uses electric heating equipment, and the sauna stove directly heats up the electrical energy, releasing heat to raise the temperature inside the room, causing people to sweat. The temperature of dry steaming is higher than that of wet steaming, which can reach around 100 ℃. Dry steaming, as it does not contain moisture, is particularly suitable for patients with rheumatism. At the same time, it does not have the smell of steam, making it more comfortable to steam through the nose. However, after steaming, the skin will become drier, so it is necessary to replenish water. 2. Sweat steaming room A sweat steaming room is a room where water is boiled to produce steam, which is then sprayed out through a pipeline to produce sufficient moisture. The temperature is generally controlled around 50 ℃. Most women choose sweat steaming because after steaming, their skin will become more ruddy and hydrated than before. Sweating room is a type of sauna tha
The core component of the sweat steaming room, the germanium carbon based radiation energy plate, can release a large amount of far-infrared light with wavelengths ranging from 5.6 to 15 microns, which is the lifeline of human beings. When the infrared light comes into contact with molecules with electromagnetic properties (water molecules), the speed of the lightest hydrogen molecule is 1.8 kilometers per second, and the direct distance can travel 1.78 kilometers × 10-5cm, which collides with other molecules 10 billion times per second, will generate rotational motion (vibration), providing electromagnetic molecules (water molecules) with motion heat, accelerating the vibration of the already vibrating molecules and colliding with other molecules. This collision can generate heat. The average body temperature of a person is 36.5 ℃. According to the formula (273 ℃+36.5 ℃)/2897=9.36 microns, if the temperature is converted to wavelength, 9.36 microns is exactly between 5.6 and 15 m
1. Beauty and slimming: Obese people take a 20-60 light wave slimming bath, which consumes approximately 600 calories and excretes about 1 kilogram of sweat, equivalent to the energy required for jogging 10 kilometers. This 1 kilogram of sweat includes various excreta in the body, including a large amount of excess subcutaneous fat. Regular light wave slimming baths can effectively achieve weight loss goals. 2. Detoxification and purification: Various toxins accumulated in the human body, such as heavy metal ions such as lead, cadmium, mercury, aluminum, etc. Alcohol and nicotine disrupt the inherent dynamic balance of the human body and become hidden dangers of various diseases. Far infrared sauna effectively adjusts the balance of the body by activating human cells, promoting harmful substances to be excreted from the body through sweat, without excreting essential nutrients, which greatly helps to balance metabolism in the body. 3. Beautifying the skin: With age, the blood sup
Address：Room 1110, Building A, RongChaoYinglong Building, No. 5 Longfu Road, Longgang Central City Shenzhen, Guangdong
