Shenzhen Bropool Industrial Co., Ltd. is a professional manufacturer on sauna room, hot tub and cold plunge
Tel:+86 18928448819 E-mail:info@bropool.com
Home> other news>new> far infrared sauna room.Installation methods and precautions for sauna rooms>
2023-12-04 attribution:other news
Sauna rooms, also known as sweat steam rooms, originated in Finland and include dry steam rooms and wet steam rooms. However, people usually refer to sauna rooms as dry steam rooms and steam rooms as wet steam rooms. Traditional sauna uses burning mineral stones and splashing water on them to generate steam, while modern sauna uses far-infrared and negative ions to achieve the effectiveness of sauna. Sauna rooms have various functions such as weight loss, detoxification, and rheumatism, and are highly loved by consumers. The manufacturer of far-infrared sauna rooms stated that they must pay attention to two aspects when installing sauna rooms: one is the insulation of the sauna room, and the other is the excessive wind in the sauna room.
Sauna room insulation
Disinfectant swimming pools should be equipped with suitable insulation treatment for the walls, ceilings, and doors of the sauna room. When calculating the power request of the electric heater, approximately 1.2 cubic meters of volume will be added per square meter of uninsulated details. Proper moisture-proof treatment should be carried out. The policy is to control the entry of damp gas into other rooms or walls. The moisture-proof installation should be installed between the heating insulation layer and the Flat noodles.
The insulation and moisture-proof installation of the swimming pool cleaning sauna room should be installed from the outside to the inside according to the following specifications.
1. The thickness of the wall insulation layer should not be less than 50mm, while the thickness of the ceiling should not be less than 100mm.
2. Using cardboard boxes or aluminum foil as a vapor barrier distance layer, installed above the insulating aluminum foil.
3. At least 20mm air slot shall be reserved between the vapor barrier distance layer and the external Flat noodles.
4. In order to make the back of the Flat noodles secure the moist gas, a groove should be reserved between the wall Flat noodles and the ceiling.
The sauna room is too windy
To achieve soothing sauna effects, a suitable proportion of hot and cold air should be mixed in the sauna room. Another cause of excessive wind is to receive the air around the electric heater and transmit heat to the farther end of the room. The central position of the air inlet and outlet is arranged in proportion to the center of the room.
Read recommendations:
hydrotherapy hot tubs for sale
The sweat steaming room returns to a refreshing feeling.hot tub wood heater