The room tripped as soon as it was started, how could it happen

　　The service life of a sauna stove is very long and generally not prone to problems. Most of the reasons for this situation are due to customers acting too hastily during the use process.

　　Because sauna stoves have a heating and preheating time, usually around half an hour, sometimes people can't bear it and pour water into them before the sauna stones have fully absorbed enough heat. As a result, the poured water cannot be fully evaporated, and some water will flow into the furnace along the wall. The sauna stove itself has a circuit protection function, and when a short circuit is detected, the system will automatically cut off the power supply, This will trip as soon as it starts.

　　The solution is very simple: remove the "ground wire" of the furnace, dry burn for about half an hour, wait for the moisture inside the furnace to completely evaporate, then connect the ground wire, and there will be no problem starting.

Read recommendations:

Far Infrared Sauna

Hot Tub Hydrotherapy order

cold plunge tank

cedar barrel sauna supplier

How to install a household sweat steaming room and introduce these 6 popular styles.submersible hot tub stove