Shenzhen Bropool Industrial Co., Ltd. is a professional manufacturer on sauna room, hot tub and cold plunge
Tel:+86 18928448819 E-mail:info@bropool.com
2023-08-18 attribution:News
Although public hot springs can be a fun social experience, sharing body fluids with many strangers poses some health risks. In warm water environment such as hot spring, the risk of infectious diseases infection increases. Although most companies require customers to take a shower before entering a hot spring or sauna, this can only eliminate bacteria or toxins from their bodies. As people sweat, the waste they secrete directly enters the water or various hard surfaces at the spa. The busier the spa, the more waste it accumulates. A common practice to prevent the spread of bacteria in public bathrooms is to use chemical antibacterial sprays. Unfortunately, this has created a perfect breeding ground for metabacteria such as MRSA.
So now household sauna equipment is very popular, let's take a look at the precautions for repairing household sauna equipment!
Household sauna equipment includes sauna stove, sauna board, wooden fence, insulation cotton, wooden keel, and boarding board. Below, let's share some precautions for household sauna equipment installation requirements.
Firstly, the connection point of the sauna room should be flat and smooth. Before decorating a household sauna, it is important to consider a good plan that includes location, shape, and size. In general, the area is within 3 square meters, and the voltage of 220V is sufficient. If the area is large, the voltage requirements will be higher, so it should be considered in advance. After the construction is completed, it is necessary to check whether the connection points are flat and smooth. Be sure to have a delicate feel and hardware accessories that are moisture-resistant and durable.
Two points: Moisture prevention in the sauna room. The sauna room needs proper moisture-proof treatment to prevent wet gas from entering the room or the wall. It can be installed between the insulation layer and Flat noodles.
The third point: The walls, ceilings, and doors in a sauna house should be insulated. When calculating the requirements for electrical power, approximately 1.2 cubic meters of volume will be added per square meter of uninsulated surface.
Fourth point: The ventilation effect of the sauna room is better. The space in the sauna room is relatively small, so in order to have a soothing sauna effect, it is necessary to ensure that the proportion of hot and cold air in and out of the sauna room is appropriate. This way, it can absorb the air around the electric heater and transfer the heat from the sauna room to other parts of the room, ensuring fresh air.
Read recommendations:
cold plunge tub with chiller for sale
Household health sweat steaming room.Hot Tub Hydrotherapy order