Maintenance process for sweat steaming room manufacturers

　　1. The sweat steaming room must be equipped with a professionally trained person for maintenance and explanation of sweat steaming;

　　2. Smoking and the use of open flames are strictly prohibited in the sweat steaming room;

　　3. Please open the sweat steaming room every morning and evening to exchange air;

　　4. Do not use strong smelling detergents when wiping the sweat steaming room;

　　5. The maximum ground temperature of the sweat steaming room should not exceed 48 degrees Celsius, usually controlled at degrees Celsius;

　　6. The indoor temperature of the sweat steaming room is automatically controlled, set between 42 ° -48 ° C, based on the thermometer, and adjusted using a temperature controller. The maximum indoor temperature should not exceed 55 ° C

　　Service personnel exceeding 55 ° C must immediately cut off the power supply.

　　7. Every morning, a UV disinfection lamp must be used to disinfect the sweat steaming room once;

　　8. The sweat steaming room needs to be pre heated within 120 minutes before opening;

　　9. The humidity in the sweat steaming room should not exceed 80%, and water should not be sprayed for flushing. If there is an unexpected situation, please immediately cut off the power supply, evacuate customers, and identify the cause before resolving it.

Read recommendations:

Cold Plunge CT-06

order Hot Tub Health Benefits

sauna barrel outdoor design

cedar barrel sauna supplier

What are the installation and construction steps for the sweat steaming room?timberline wood fired hot tub heater