Household wet steam sauna room

　　The installation of the air inlet in the sauna room should be directly installed on the wall below the electric heater. When operating under strong wind, the air inlet should be installed at least 60cm above the electric heater or on the ceiling above the electric heater. After passing through these air vents, heavier cold air enters the sauna and mixes with the lighter hot air that erupts from the electric heater, allowing the bather to breathe strange air with plenty of space. The size of the air inlet is advocated to be 5-10cm, and the exhaust outlet should be set on the diagonal position facing the air inlet.

　　Due to the modular structure of the sauna, there are no prior requirements for civil engineering, and it can be dismantled, making it easy to move and place in another location.

　　Due to the modular structure of the sauna, there are no prior requirements for civil engineering, and it can be dismantled, making it easy to move and place in another location.

Read recommendations:

cold plunge tank

cedar barrel sauna manufacturer

Cube Sauna CS-1815

indoor barrel sauna

What is the effect of a far-infrared foot bath bucket.hot tube outdoor