1-4 Person Indoor Infrared Sauna Series
The IS-1101 1 person hemlock indoor infrared sauna is the compact entry in a four-model series that also includes IS-1102 for two people, IS-1103 for three people and IS-1104 for four people.
Choose IS-1101, IS-1102, IS-1103 or IS-1104. The selected model carries its capacity, image and reference into the quotation request.
- Capacity
- 1 person (nominal)
- Dimensions
- 900 × 900 × 1950 mm recorded; drawing conflict / 37.4 × 37.4 × 76.7 in shown on supplied drawing
- Material
- Hemlock; red-cedar route recorded
- Configuration
- Far-infrared carbon-crystal heating on electric supply is supported for exact IS-1101; final voltage, wattage and heater layout require the approved technical file.
Confirm final footprint against the approved production drawing.
- 1-4 person model selection
- Model-specific; select IS-1101, IS-1102, IS-1103 or IS-1104
- Natural timber finish; confirm the selected model specification
- Infrared heating plates, controls, lighting and seating layout vary by selected model
Select the exact model or configuration, then provide destination, quantity, access dimensions, electrical supply and required options.
1-4 Person Indoor Infrared Sauna Series
The IS-1101 1 person hemlock indoor infrared sauna is shown with complete-product images before close details. Choose IS-1101 for one person, IS-1102 for two people, IS-1103 for three people or IS-1104 for four people. The page keeps these related sizes together so the selected model can carry into the RFQ.
What buyers can evaluate from this model.
The IS-1101 1 person hemlock indoor infrared sauna is the compact entry in a four-model series that also includes IS-1102 for two people, IS-1103 for three people and IS-1104 for four people.
Capacity and layout
1-4 person model selection
Brochure-recorded size
Model-specific; select IS-1101, IS-1102, IS-1103 or IS-1104
Material and finish
Natural timber finish; confirm the selected model specification
Compare sizes, materials and configuration choices.
Use the IS-1101 1 person hemlock indoor infrared sauna brochure-recorded values for comparison and confirm the selected configuration on the final production drawing.
| Model | Capacity | Recorded dimensions / source status | Material | Heating / configuration |
|---|---|---|---|---|
| IS-1101 | 1 person (nominal) | 900 × 900 × 1950 mm recorded; drawing conflict / 37.4 × 37.4 × 76.7 in shown on supplied drawing | Hemlock; red-cedar route recorded | Far-infrared carbon-crystal heating on electric supply is supported for exact IS-1101; final voltage, wattage and heater layout require the approved technical file.Confirm final footprint against the approved production drawing. |
| IS-1102 | 2 person (nominal) | 1200 × 1000 × 1950 mm (recorded order) | Hemlock; red-cedar route recorded | Electric far-infrared family route; confirm the exact IS-1102 voltage, wattage, heater count and included control package before quotation.Confirm width/depth labeling and final drawing. |
| IS-1103 | 3 person (nominal) | 1800 × 1100 × 1950 mm (recorded order) | Hemlock; red-cedar route recorded | Electric far-infrared family route; confirm the exact IS-1103 voltage, wattage, heater count and included control package before quotation.Confirm width/depth labeling and final drawing. |
| IS-1104 | 4 person (nominal) | 1800 × 1400 × 1950 mm (recorded order) / 56 × 72 × 76.7 in also recorded; confirm orientation | Hemlock; red-cedar route recorded | Electric far-infrared family route; confirm the exact IS-1104 voltage, wattage, heater count and included control package before quotation.Confirm metric/imperial orientation and final drawing. |
| Family | IS-1101 to IS-1104 Infrared Sauna Series |
|---|---|
| SKU | IS-1101 |
The brochure records Model-specific; select IS-1101, IS-1102, IS-1103 or IS-1104 and 1-4 person model selection.
Inspect the construction and user touchpoints.
Review the complete product, glass entrance, seating, visible heating elements, controls and lighting in the gallery.
Wider cabin front view
The IS-1103 complete front view shows the wider family format without cropping the cabinet.
Four-person cabin route
The IS-1104 complete front view records the widest supplied family cabinet and its glazed front.
IS-1101 three-quarter view
The left three-quarter image helps buyers inspect cabinet depth and side construction.
Opposite side view
The right three-quarter image adds the second exterior angle for the IS-1101 body.
Upper interior
The interior image records lighting, ventilation details, seating and visible panel positions.
Door hardware and side panel
A close-up shows the timber handle, glazed entrance and adjacent guarded panel.
Confirm the site and utilities before ordering.
Confirm access, floor support, ventilation, electrical supply, heater clearances and service access for the selected model.
Prepare the site
Provide destination, quantity, room and access dimensions, electrical supply, expected use and preferred options.
Install & commission
Installation and commissioning must follow the approved drawing and manual for the selected configuration.
Operate & maintain
Operate, clean and inspect the sauna according to the model-specific manual and heater instructions.
Pre-order requirement check
Evaluate where this product may fit.
Suitable for prepared indoor residential and private wellness spaces; commercial-duty use requires separate assessment.
Indoor wellness rooms and showroom ranges
Choose the cabin by user capacity, footprint and site conditions; the showroom image is a placement reference rather than the selected model specification.
Compact indoor project evaluation
The narrow format can be evaluated where usable floor area is limited, but final dimensions and clearance must be checked first.
Distributor and private-label review
Trade buyers can review the model for an assortment after confirming target market, quantity, documents and feasible branding scope.
Turn the selected model into a quotation-ready brief.
Finish, controls, lighting, accessories, branding, documents and packaging can be reviewed for the selected model.
Items to review with Bropool
- Brand presentationReview logo, labels, manuals and packaging artwork against the order.
- Finish and configurationConfirm available finishes, controls, accessories and technical feasibility for the exact model.
- Destination file setMatch electrical or heater configuration and documents to the target market.
Availability depends on the model, quantity, technical compatibility and destination requirements.
A clear path from configuration to delivery.
Packing, documents, handling and delivery are confirmed after the exact model and configuration are approved.
01. Confirm
Confirm model, destination, quantity, options, site constraints and buyer responsibilities.
02. Document
Review the final drawing, specification, manual, packing list and applicable market documents.
03. Protect
Confirm the model-specific packing method, packed dimensions, gross weight and handling points.
04. Deliver
Confirm shipping, unloading and delivery terms for the exact route and destination.
Built for model selection, configuration review and RFQ.
Bropool maintains this page as the manufacturing and project-supply reference for IS-1101 to IS-1104 Infrared Sauna Series. It supports comparison and quotation preparation; the approved quotation and technical file control the final order.
Bropool
Product identity, supplied photography and quotation-stage information are maintained at company level by Bropool.
Model records + supplied media
Visible claims are based on the current product record and supplied photography. Dimensions, electrical data, inclusions and market requirements remain subject to approved project documents.
Page checked September 15, 2026
Options, installation conditions, documents, branding and delivery scope are confirmed against the selected model and destination market.
Questions to settle before quotation.
Common questions about the IS-1101 1 person hemlock indoor infrared sauna size, capacity and configuration.
What should buyers confirm for the IS-1101 1 Person Hemlock Indoor Infrared Sauna?
For the IS-1101 1 Person Hemlock Indoor Infrared Sauna, confirm the approved drawing, selected configuration, site requirements, standard inclusions and destination details before order.
Does selecting a model change the main image?
Yes. The selector changes the complete main product view and carries the selected model into the configuration RFQ.
Are the displayed dimensions final?
No. Confirm the approved production drawing. IS-1101 has a current footprint conflict, and axis labeling must be confirmed for all models.
Can hemlock and red cedar stay on one page?
Yes. They are material routes within the same family, subject to availability and model-specific approval.
Are electrical and panel options standard?
No. Voltage, frequency, power, connection, panel layout, controls and accessories must be listed for the selected configuration.
What should an RFQ include?
Send the model, destination, quantity, room and access dimensions, electrical supply and any finish, lighting, branding, document or packaging requirements.