Round Cold Plunge with Step and Handrail Options
The CT-10 cold plunge is a round upright cold plunge family with step and handrail-equipped access options with 304 stainless-steel vessel with wood exterior. Working overall dimensions: CT-10 brochure drawing: Ø960 × H1000 mm; CT-10-2 standard-size line: Ø900 × H1000 mm. Working internal dimensions: CT-10 drawing shows Ø900 mm…
Compare the standard step and handrail-equipped access layouts; final diameters follow the approved drawing.
- Capacity
- Usable volume to confirm
- Dimensions
- Drawing: Ø900 tank inside Ø960 external, H1000 mm; source text repeats Ø960
- Material
- 304 stainless-steel liner with red-cedar exterior
- Configuration
- Wood-and-metal stair layout with external chiller
The diameter text/drawing conflict requires an approved drawing.
- Round upright cold plunge family with step and handrail-equipped access options
- Working size: CT-10 brochure drawing: Ø960 × H1000 mm; CT-10-2 standard-size line: Ø900 × H1000 mm
- Material: 304 stainless-steel vessel with wood exterior
Confirm model, site, utilities, equipment, included items, options, destination, quantity and target timing.
Round Cold Plunge with Step and Handrail Options
The CT-10 cold plunge gives wholesale, hospitality and project buyers a clear reference for the round upright cold plunge family with step and handrail-equipped access options. The photographed complete product establishes the visible form; the quotation confirms the selected materials, system, accessories and destination requirements.
What buyers can evaluate from this model.
Start with the complete product form, then verify the selected materials, dimensions, equipment and site interfaces.
Complete CT-10 cold plunge product view
The lead image shows the complete tub before closer construction, connection or application views.
Defined material and dimension starting point
The draft separates working comparison dimensions from the final approved drawing and itemized order specification.
RFQ-ready project configuration
Buyers can compare finishes, equipment and OEM needs while keeping unconfirmed items out of the standard supply.
Compare sizes, materials and configuration choices.
Use the working dimensions for comparison and the approved drawing and technical file for the order.
| Model | Capacity | Recorded dimensions / source status | Material | Heating / configuration |
|---|---|---|---|---|
| CT-10 | Usable volume to confirm | Drawing: Ø900 tank inside Ø960 external, H1000 mm; source text repeats Ø960 | 304 stainless-steel liner with red-cedar exterior | Wood-and-metal stair layout with external chillerThe diameter text/drawing conflict requires an approved drawing. |
| CT-10-2 | Usable volume to confirm | Text: Ø840 × H950 tank; Ø900 × H1000 external; drawing also shows Ø900 tank | 304 stainless-steel liner with red-cedar exterior | Handrail-equipped steps and equipment-housing layoutThe tank-diameter conflict requires an approved drawing. |
| Family | CT-10 Family |
|---|---|
| SKU | CT-10 |
| Model | CT-10 |
| Product Type | Round upright cold plunge family with step and handrail-equipped access options |
| Working Overall Dimensions | CT-10 brochure drawing: Ø960 × H1000 mm; CT-10-2 standard-size line: Ø900 × H1000 mm |
| Working Internal Dimensions | CT-10 drawing shows Ø900 mm inside Ø960 mm; CT-10-2 standard-size line states Ø840 × H950 mm |
| Material Configuration | 304 stainless-steel vessel with wood exterior |
| System Configuration | External water-temperature equipment and connections to be selected |
| Available Choices | CT-10 step access · CT-10-2 step and handrail access |
The CT-10 text repeats Ø960 for tank and external size while the drawing shows Ø900 inside Ø960. The CT-10-2 text states Ø840 × H950 tank / Ø900 × H1000 external while its drawing also shows Ø900. Keep these diameter conflicts model-specific.
Inspect the construction and user touchpoints.
Use the gallery to review visible construction and interfaces. Hidden functions, ratings and inclusions are confirmed in the model-specific technical file.
Overall product form
Review the complete vessel, exterior enclosure, entry arrangement and equipment zone visible in the gallery.
Vessel and exterior construction
Confirm the selected material, finish, thickness and fabrication details against the approved production specification.
Connections and service access
Use the final interface drawing to plan water, drainage, power, ventilation and maintenance clearance.
Confirm the site and utilities before ordering.
Confirm delivery access, finished base, water, drainage, electrical supply, ventilation and service responsibilities before ordering.
Prepare the site
Provide destination, site and access dimensions, finished base conditions, utilities, ambient conditions, expected use and preferred configuration.
Install & commission
Installation and commissioning must follow the approved drawing and manual for the exact configuration and applicable local requirements.
Operate & maintain
Operate, clean and inspect the final product under its approved manual and site sanitation plan. Keep connections, ventilation and service areas accessible.
Pre-order requirement check
Evaluate where this product may fit.
Application fit depends on the approved configuration, site, expected use, supervision and maintenance responsibilities.
Illustrative CT-10 placement
This model-matched illustrative scene helps buyers review footprint, access and surrounding space. It is not presented as a customer installation.
CT-10 step-access option
Complete product reference for the standard step-access layout.
CT-10-2 handrail option
Product reference for the handrail-equipped steps and equipment-housing layout.
Turn the selected model into a quotation-ready brief.
After the base model and technical configuration are fixed, Bropool can review finish, branding, controls, accessories, documents and packing for the project.
Items to review with Bropool
- Exterior and finish reviewConfirm material, finish sample, trim and visual treatment for the selected model.
- Branding and control presentationReview logo placement and interface presentation after the technical configuration is approved.
- Documents and packingConfirm destination documents, labeling, manuals and packing requirements for the exact order.
No universal option, minimum quantity, surcharge, lead time, certificate or performance result is promised before model-specific review.
A clear path from configuration to delivery.
Packing, documents, handling and delivery are confirmed after the exact model and configuration are approved.
01. Confirm
Confirm model, destination, quantity, options, site constraints and buyer responsibilities.
02. Document
Review the final drawing, specification, manual, packing list and applicable market documents.
03. Protect
Confirm model-specific packing method, packed dimensions, gross weight and handling points.
04. Deliver
Confirm shipping, unloading and delivery terms for the exact destination.
Built for model selection, configuration review and RFQ.
Bropool maintains this page as the manufacturing and project-supply reference for CT-10 Family. It supports comparison and quotation preparation; the approved quotation and technical file control the final order.
Bropool
Product identity, supplied photography and quotation-stage information are maintained at company level by Bropool.
Model records + supplied media
Visible claims are based on the current product record and supplied photography. Dimensions, electrical data, inclusions and market requirements remain subject to approved project documents.
Page checked September 14, 2026
Options, installation conditions, documents, branding and delivery scope are confirmed against the selected model and destination market.
Questions to settle before quotation.
Common buyer questions are answered while final technical and commercial scope remains model-specific.
What dimensions are available for the CT-10 cold plunge?
Working overall dimensions are CT-10 brochure drawing: Ø960 × H1000 mm; CT-10-2 standard-size line: Ø900 × H1000 mm; working internal dimensions are CT-10 drawing shows Ø900 mm inside Ø960 mm; CT-10-2 standard-size line states Ø840 × H950 mm. Confirm the final axes and production drawing before order.
What materials are specified for this model?
304 stainless-steel vessel with wood exterior. Confirm finish samples, construction details and any model-specific substitutions in the quotation.
Is the temperature-control equipment included?
Do not assume inclusion. External water-temperature equipment and connections to be selected. The formal quotation must itemize the equipment, controls, filtration, connections and accessories.
Can Bropool review an OEM or private-label configuration?
Yes. Send the base model, finish, branding, quantity, destination and document requirements for a configuration review. Availability and scope are confirmed for the specific project.
What site information should a buyer provide?
Provide the access route, finished base, water and drainage plan, available electrical supply, ambient conditions, service clearances and expected use.
What should the RFQ include?
Send the model, destination, quantity, target timing, site details, preferred finish, equipment requirements and any branding, document or packing requests.