Round Cold Plunge Family with Three Exterior Configurations
The CT-06 cold plunge is a round upright cold plunge family with 304 stainless-steel liner with black wpc, wood-look wpc or black/stainless exterior configurations. Working overall dimensions: 860 mm diameter × 1000 mm high. Working internal dimensions: 800 mm diameter × 950 mm high. External water-temperature equipment and conn…
Compare the three brochure-defined exterior and access configurations; equipment scope is confirmed separately.
- Capacity
- Usable volume to confirm
- Dimensions
- Tank Ø800 × H950 mm; external Ø860 × H1000 mm
- Material
- 304 stainless-steel liner with black WPC exterior
- Configuration
- Black WPC body with step and optional stool direction
Confirm the stool, chiller and standard supply for this configuration.
- Round upright cold plunge family
- Working size: 860 mm diameter × 1000 mm high
- Material: 304 stainless-steel liner with black WPC, wood-look WPC or black/stainless exterior configurations
- Gallery images are family references; only configurations with an assigned image have model-specific imagery.
Confirm model, site, utilities, equipment, included items, options, destination, quantity and target timing.
Round Cold Plunge Family with Three Exterior Configurations
The CT-06 cold plunge gives wholesale, hospitality and project buyers a clear reference for the round upright cold plunge family. The photographed complete product establishes the visible form; the quotation confirms the selected materials, system, accessories and destination requirements.
What buyers can evaluate from this model.
Start with the complete product form, then verify the selected materials, dimensions, equipment and site interfaces.
Complete CT-06 cold plunge product view
The lead image shows the complete tub before closer construction, connection or application views.
Defined material and dimension starting point
The draft separates working comparison dimensions from the final approved drawing and itemized order specification.
RFQ-ready project configuration
Buyers can compare finishes, equipment and OEM needs while keeping unconfirmed items out of the standard supply.
Compare sizes, materials and configuration choices.
Use the working dimensions for comparison and the approved drawing and technical file for the order.
| Model | Capacity | Recorded dimensions / source status | Material | Heating / configuration |
|---|---|---|---|---|
| CT-06-1 | Usable volume to confirm | Tank Ø800 × H950 mm; external Ø860 × H1000 mm | 304 stainless-steel liner with black WPC exterior | Black WPC body with step and optional stool directionConfirm the stool, chiller and standard supply for this configuration. |
| CT-06-2 | Usable volume to confirm | Tank Ø800 × H950 mm; external Ø860 × H1000 mm | 304 stainless-steel liner with wood-look WPC exterior | Wood-look WPC body with step; red-cedar or stainless chair direction shownConfirm the final chair, step and standard supply for this configuration. |
| CT-06-3 | Usable volume to confirm | Tank Ø800 × H950 mm; external Ø860 × H1000 mm | 304 stainless-steel liner with black or stainless exterior | Black/stainless exterior with wooden access stepNo CT-06-3-specific image is assigned yet. The gallery remains a CT-06 family reference and does not represent this option’s exact appearance. |
| Family | CT-06 Family |
|---|---|
| SKU | CT-06 |
| Model | CT-06 |
| Product Type | Round upright cold plunge family |
| Working Overall Dimensions | 860 mm diameter × 1000 mm high |
| Working Internal Dimensions | 800 mm diameter × 950 mm high |
| Material Configuration | 304 stainless-steel liner with black WPC, wood-look WPC or black/stainless exterior configurations |
| System Configuration | External water-temperature equipment and connections to be selected |
| Available Choices | CT-06-1 · CT-06-2 · CT-06-3 |
The current records repeat the same 800 × 950 mm tank and 860 × 1000 mm external dimensions for all three configurations.
Inspect the construction and user touchpoints.
Use the gallery to review visible construction and interfaces. Hidden functions, ratings and inclusions are confirmed in the model-specific technical file.
Overall product form
Review the complete vessel, exterior enclosure, entry arrangement and equipment zone visible in the gallery.
Vessel and exterior construction
Confirm the selected material, finish, thickness and fabrication details against the approved production specification.
Connections and service access
Use the final interface drawing to plan water, drainage, power, ventilation and maintenance clearance.
Confirm the site and utilities before ordering.
Confirm delivery access, finished base, water, drainage, electrical supply, ventilation and service responsibilities before ordering.
Prepare the site
Provide destination, site and access dimensions, finished base conditions, utilities, ambient conditions, expected use and preferred configuration.
Install & commission
Installation and commissioning must follow the approved drawing and manual for the exact configuration and applicable local requirements.
Operate & maintain
Operate, clean and inspect the final product under its approved manual and site sanitation plan. Keep connections, ventilation and service areas accessible.
Pre-order requirement check
Evaluate where this product may fit.
Application fit depends on the approved configuration, site, expected use, supervision and maintenance responsibilities.
Illustrative CT-06 placement
This model-matched illustrative scene helps buyers review footprint, access and surrounding space. It is not presented as a customer installation.
CT-06-1 black WPC configuration
Complete product reference for the black WPC configuration.
CT-06-2 wood-look WPC configuration
Complete product reference for the wood-look WPC configuration; CT-06-3 still needs a separate accurate image.
Turn the selected model into a quotation-ready brief.
After the base model and technical configuration are fixed, Bropool can review finish, branding, controls, accessories, documents and packing for the project.
Items to review with Bropool
- Exterior and finish reviewConfirm material, finish sample, trim and visual treatment for the selected model.
- Branding and control presentationReview logo placement and interface presentation after the technical configuration is approved.
- Documents and packingConfirm destination documents, labeling, manuals and packing requirements for the exact order.
No universal option, minimum quantity, surcharge, lead time, certificate or performance result is promised before model-specific review.
A clear path from configuration to delivery.
Packing, documents, handling and delivery are confirmed after the exact model and configuration are approved.
01. Confirm
Confirm model, destination, quantity, options, site constraints and buyer responsibilities.
02. Document
Review the final drawing, specification, manual, packing list and applicable market documents.
03. Protect
Confirm model-specific packing method, packed dimensions, gross weight and handling points.
04. Deliver
Confirm shipping, unloading and delivery terms for the exact destination.
Built for model selection, configuration review and RFQ.
Bropool maintains this page as the manufacturing and project-supply reference for CT-06 Family. It supports comparison and quotation preparation; the approved quotation and technical file control the final order.
Bropool
Product identity, supplied photography and quotation-stage information are maintained at company level by Bropool.
Model records + supplied media
Visible claims are based on the current product record and supplied photography. Dimensions, electrical data, inclusions and market requirements remain subject to approved project documents.
Page checked September 14, 2026
Options, installation conditions, documents, branding and delivery scope are confirmed against the selected model and destination market.
Questions to settle before quotation.
Common buyer questions are answered while final technical and commercial scope remains model-specific.
What dimensions are available for the CT-06 cold plunge?
Working overall dimensions are 860 mm diameter × 1000 mm high; working internal dimensions are 800 mm diameter × 950 mm high. Confirm the final axes and production drawing before order.
What materials are specified for this model?
304 stainless-steel liner with black WPC, wood-look WPC or black/stainless exterior configurations. Confirm finish samples, construction details and any model-specific substitutions in the quotation.
Is the temperature-control equipment included?
Do not assume inclusion. External water-temperature equipment and connections to be selected. The formal quotation must itemize the equipment, controls, filtration, connections and accessories.
Can Bropool review an OEM or private-label configuration?
Yes. Send the base model, finish, branding, quantity, destination and document requirements for a configuration review. Availability and scope are confirmed for the specific project.
What site information should a buyer provide?
Provide the access route, finished base, water and drainage plan, available electrical supply, ambient conditions, service clearances and expected use.
What should the RFQ include?
Send the model, destination, quantity, target timing, site details, preferred finish, equipment requirements and any branding, document or packing requests.