outdoor barrel sauna.What are the preparations for the sauna room?

　　Sauna rooms are actually evolved from Finland, which uses traditional sauna methods with yellow mud as the main theme element. The materials used in the evolution are all made of sauna boards, which are divided into domestic production and imported parts. Moreover, the price difference is significant, and the quality difference is also quite obvious. In general, the quality of a device depends on whether the material is good or bad, In fact, no matter what kind of product there is, there is a difference of three, six, or nine. However, what we want is quality itself, so we should not consider price. If we consider price, we need to bypass quality issues. Everyone knows the principle of getting what you pay for, which is also a hard truth.

　　The installation of a sauna room is actually very simple, and the process is not complicated. The installation period only requires the cooperation of both parties, which is divided into several simple parts.

　　1: On site measurement requires merchants to measure the dimensions of the reserved space in the sauna room, including length, width, height, and door opening dimensions.

　　2: Drawing planning: After measuring the dimensions of the game, the merchant provides a specific installation plan and drawings to mark each node and the basic outline of the installation.

　　3: Installation plan: After the merchant completes the production of installation drawings, the user confirms them. If there are any areas that need to be modified, they need to communicate with the merchant before making the necessary changes.

　　4: Stock up installation: After communicating the installation drawings in the early stage, it enters the stock up period. The stock up period usually takes 15-45 days to complete the installation work of the sauna room. After the installation is completed, the merchant will debug and test according to the on-site conditions, as well as demonstrate the operation process on site.

　　In fact, the entire sauna installation process, from measurement to installation and debugging, does not require much effort. The regulations are clear and the user only needs to reserve the power supply, and the remaining measurement, drawing planning, installation, and debugging are all completed by the merchant. Therefore, the entire process is relatively simple, worry free, labor-saving, and time-saving.

Read recommendations:

cube sauna room Solution

sauna stove wood burning exporter

Hot Tub HT-101

ice barrell cold therapy

redwood outdoors barrel sauna.What are the classifications of saunas?